The Vista

A. Be sure that the power button on the side of your projector is pushed all the way forward.

B. If your system has an amplifier be sure that the amplifier is powered on. The power switch is located on the front of the Amplifier.

C. Be sure that all of your cables are plugged into the right slots. The slots and cables are color coordinated.

D. If none of the options above fix the issue, please reach out to info@renewoutreach.org for further assistance.

A. Make sure that your Aux Cable (Color: Green)  is fully inserted into the projector and respective Amp or Speaker.

B. Turn up the volume on the projector itself by tapping the left and right arrows once your film begins to play. 

C. Turn up the knobs on your Amplifier – there are different knobs for each port. Ensure that the port you are connected to is turned up. 

D. If none of the options above fix the issue, please reach out to info@renewoutreach.org for further assistance.

Yes, you can use an HDMI cable to connect your projector to another device.

The screen is meant to be a tight fit to keep it taught during film showings, so you will likely feel some resistance while assembling the frame. It is usually best for at least two people to work together to assemble the frame, then hook the screen to the frame starting with the corners.

Yes! Please note that this will increase the charging time of the battery, and batteries should be kept out of direct sunlight while charging.